A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substratesincluding most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability)

A wide range of colours available in: Matt, Satin, Gloss, Metallic, Metalcote and a selection of mediums.

Full rangePDF Colour chart

Coverage:
14ml tin covers approx. 0.3m depending on thickness of application

Application:
Brush straight from the tin, two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner.

Airbrush with a suitable thinner such as Humbrol Enamel Thinners.

Note that Metalcote colours are designed to be polished when fully dry.

Drying time:
Gloss: 1-2 hours
Matt & Satin: 20-40 mins touch dry, up to 24 hours for hard dry
Metallics: hard dry in approx. 10 days.

Drying times will vary according to ambient temperature and humidity.

Recoat: 6 hours minimum (preferably overnight)

How to clean:

Brushes: use Humbrol Enamel Thinners
Airbrush: flush thoroughly using Humbrol Enamel Thinners.

Product is permanent once dry.